How To Adjust Draw Length On A Hoyt Compound Bow

How to Adjust Draw Length on a Hoyt Compound Bow

The draw length of a Hoyt compound bow is one of its most important adjustments. It is the distance from the nocking point to the grip of the bow when the bowstring is pulled back to its full draw length. In order to get the most out of your Hoyt compound bow, it is important to set the draw length correctly. With the right draw length, you will be able to shoot the arrow farther and with more accuracy. Here is a step-by-step guide on how to adjust the draw length on your Hoyt compound bow.

Step 1: Determine Your Draw Length

The first step in adjusting the draw length of your Hoyt compound bow is to determine what your draw length should be. This can be done by measuring the distance between your fingertip and the corner of your mouth when you are fully drawn. This distance should be the same as the draw length of the bow. If your draw length is too long, the bow will be difficult to draw and you will not be able to draw the bow to its full draw length. Conversely, if your draw length is too short, you will not be able to draw the bow to its full draw length and the bow will be difficult to aim.

Step 2: Adjust the Draw Length

Once you have determined the correct draw length for your Hoyt compound bow, you can begin to adjust the draw length. To do this, you will need to loosen the limb bolts on the bow. Start by taking off the string and then remove the limb bolts. You can do this with a wrench or a socket set. Once the limb bolts are removed, turn the limb bolts clockwise or counterclockwise to increase or decrease the draw length. Make sure to adjust the draw length in small increments and be sure to re-tighten the limb bolts after every adjustment.

Step 3: Test the Draw Length

Once you have adjusted the draw length of your Hoyt compound bow, it is important to test it and make sure that it is set correctly. To do this, you will need to draw the bow and check the distance between the nocking point and the grip. If the draw length is too long, you will need to make further adjustments to the limb bolts. If the draw length is too short, you will need to adjust the limb bolts in the opposite direction. Once you have set the draw length correctly, you can re-attach the string and test it again to make sure the draw length is correct.

Step 4: Final Adjustments

Once you have set the draw length of your Hoyt compound bow correctly, you can make the final adjustments. This includes adjusting the limb bolts to ensure that the draw length is consistent across all four limbs. You should also check the tiller of the bow, which is the difference in draw length between the top and bottom limb. If the tiller is incorrect, you can adjust the limb bolts to make the tiller even. Finally, you should check the brace height of the bow, which is the distance between the bowstring and the grip of the bow when it is fully drawn. Adjustments can be made to the brace height by moving the limb bolts.

Adjusting the draw length of your Hoyt compound bow is an important step in setting up your bow for the best performance. With the right draw length, you will be able to shoot the arrow farther and with more accuracy. By following the steps outlined above, you should be able to adjust the draw length of your Hoyt compound bow quickly and easily.