Mathews Z7 Draw Length Adjustment

A Guide To Adjusting the Draw Length on a Mathews Z7 Bow

If you are a serious archer, you likely know the importance of having the right draw length on your bow. The draw length needs to be adjusted correctly in order to maximize accuracy and performance. Adjusting the draw length on a Mathews Z7 Bow is a relatively simple process, but it is important to understand exactly what you are doing before you make any changes. Here is a step-by-step guide to adjusting the draw length on a Mathews Z7 Bow.

Step One: Measure Your Draw Length

The first step in adjusting the draw length on a Mathews Z7 Bow is to measure your current draw length. This can be done using a draw length device. You can purchase these devices from your local archery shop or online. Put the device on the string of the bow and then draw back on the bow until the arrow is in line with your draw length. Mark the point where the arrow is in line with the draw length device. Once you have marked the point, you can then measure the distance between the mark and the back of the bow, which is the draw length.

Step Two: Adjust the Draw Length

Once you have measured your draw length, it is then time to adjust it. To do this, you will need to remove the limbs from the bow. This can be done by unscrewing the limb bolts and then removing the limbs. Once the limbs are removed, you will need to adjust the limb pocket length. This should be done with a hex wrench and is usually located on the back side of the limb pocket. Turn the wrench counterclockwise until the limb pocket length is set to the desired draw length. Once the limb pocket length is set, you can then re-install the limbs and re-tighten the limb bolts.

Step Three: Check the Draw Length

Once you have adjusted the draw length, it is important to check that it is set correctly. To do this, you will need to draw back on the bow and check the draw length. The draw length should be set to the desired length and should not be adjusted again. If the draw length is not set correctly, then you may need to adjust it again. It is also important to check the limb pocket length as well to make sure that it is correct.

Adjusting the draw length on a Mathews Z7 Bow is not a difficult process, but it is important to make sure that it is done correctly. By following the steps outlined above, you can easily adjust the draw length on your Mathews Z7 Bow and ensure that it is set correctly for optimal performance and accuracy. Make sure to always follow the manufacturer’s instructions when adjusting the draw length on any bow.